Measure:
1. Outside to outside of the ROPS--NOTE: If the ROPS are a folding
ROPS measure outside to outside above the joint.
2. If your ROPS is a folding ROPS measure from the hinge bolt to the
top of the ROPS
3. Measure the tubing that the ROPS is constructed with. For example:
if the tubing is 2 3/4" X 3 1/2" or other.
4. If the ROPS tilts forward or backwards measure the degree of tilt by
using a 12" string approx. 12" long. Let the string hang straight down
like a plumb bob and measure from bottom of string back to the ROPS
Send these measurements by e-mail with tractor make and model to
admin@tractor-canopies.com